 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| H T-13/4 (5 mm), T-1 (3 mm), High Performance AlInGaP LED Lamps Technical Data SunPower Series HLMA-CX00 Series HLMA-DX00 Series HLMA-KX00 Series HLMT-CX00 Series HLMT-DX00 Series Features * Outstanding LED Material Efficiency * High Light Output over a Wide Range of Currents * Low Electrical Power Dissipation * CMOS/MOS Compatible * Colors: 590/592 nm Amber, 615/617 nm and 622 nm Reddish-Orange * Variety of Packages Available Description These untinted, non-diffused, solid state lamps utilize the latest absorbing/transparent substrate aluminum indium gallium phosphide (AS/TS AlInGaP) LED technology. These materials have a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. In addition, these LED lamps are at wavelengths ranging from amber to reddish orange and at viewing angles ranging from 7 to 45 degrees. Applications * Outdoor Message Boards * Safety Lighting Equipment * Signaling Applications * Emitter for Emitter/ Detector Applications * Changeable Message Signs * Portable Equipment * Medical Equipment * Automotive Lighting * Alternative to Incandescent Lamps 5963-2323E 1-37 Package Dimensions 5.08 (0.200) 4.57 (0.180) 9.19 (0.362) 8.43 (0.332) 12.70 (0.500) 11.94 (0.470) 0.89 (0.035) 0.64 (0.025) 5.08 (0.200) 4.57 (0.180) 3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 4.70 (0.185) 4.19 (0.165) 9.19 (0.362) 8.43 (0.332) 0.89 (0.035) 0.64 (0.025) 6.35 (0.250) 5.58 (0.220) 1.02 (0.040) NOM. 0.45 SQUARE NOMINAL (0.018) 25.40 MIN. (1.00) CATHODE LEAD 23.0 MIN. (0.90) 1.65 (0.065) 1.35 (0.053) CATHODE LEAD NOTE 1 25.40 MIN. (1.00) 0.102 (0.004) MAX. TYP. 1.27 NOM. (0.050) 2.54 NOM. (0.100) 1.27 NOM. (0.050) 0.64 SQUARE (0.025) NOMIMAL 1.27 NOM. (0.050) 0.46 SQUARE (0.018) NOMIMAL CATHODE 6.10 (0.240) 5.59 (0.220) 6.10 (0.240) 5.59 (0.220) 2.54 NOM. (0.100) 2.54 NOM. (0.100) NOTES A NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. THE LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040") DOWN THE LEADS, UNLESS OTHERWISE NOTED. B C 1-38 (T-13/4 Package) DC Forward Current[1,4,5] ........................................................... 50 mA Peak Forward Current[2] ........................................................... 200 mA Time Average Input Power[2] ................................................... 103 mW Transient Forward Current[3] (10 s Pulse) .............................. 500 mA Reverse Voltage (IR = 100 A) ......................................................... 5 V Operating Temperature Range .......................................... -40 to 100C Storage Temperature ......................................................... -40 to 120C Junction Temperature ................................................................. 130C Soldering Temperature .......................................... 260C for 5 seconds [1.59 mm (0.06 in.) below seating plane] Notes: 1. Derate linearly as shown in Figure 4. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Time Average Power as specified in Figure 5. 3. The transient peak current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bonds. 4. Drive Currents between 10 and 30 mA are recommended for best long term performance. 5. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative. Absolute Maximum Ratings at TA = 25C DC Forward Current[1,4,5] ........................................................... 50 mA Peak Forward Current[2] ........................................................... 200 mA Time Average Input Power[2] ................................................... 103 mW Transient Forward Current[3] (10 s Pulse) .............................. 500 mA Reverse Voltage (IR = 100 A) ......................................................... 5 V Operating Temperature Range .......................................... -40 to 100C Storage Temperature ......................................................... -40 to 100C Junction Temperature .................................................................. 110C Solder Temperature ................................................ 260C for 5 seconds [1.59 mm (0.06 in.) below seating plane] Notes: 1. Derate linearly as shown in Figure 4. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Time Average Power as specified in Figure 5. 3. The transient peak current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bonds. 4. Drive Currents between 10 mA and 30 mA are recommended for best long term performance. 5. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative. Absolute Maximum Ratings at TA = 25C (T-1 Package) 1-39 Optical Characteristics at TA = 25C TS-AlInGaP T-13/4 Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 2600 8300 2900 9000 450 1500 500 1800 Peak Wavelength peak (nm) Typ. 594 623 594 623 Color, Dominant Wavelength d[2] (nm) Typ. 592 617 592 617 Viewing Angle 21/2 Degrees[3] Typ. 8 8 24 24 Luminous Efficacy v (lm/w) 480 263 480 263 Part Number HLMTCL00[1] CH00[1] DL00[4] DH00[4] Package Drawing A B Notes: 1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 4. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. AS-AlInGaP T-13/4 Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 1000 3500 1000 3500 300 800 290 600 290 500 Peak Wavelength peak (nm) Typ. 592 621 592 621 630 Color, Dominant Wavelength d[2] (nm) Typ. 590 615 590 615 622 Viewing Angle 21/2 Degrees[3] Typ. 7 7 24 24 24 Luminous Efficacy v (lm/w) 480 263 480 263 197 Part Number HLMACL00[1] CH00[1] DL00[4] DH00[4] DG00[4] Package Drawing A B Notes: 1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 4. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. AS-AlInGaP T-1 Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 35 200 35 200 Peak Wavelength peak (nm) Typ. 592 621 Color, Dominant Wavelength d[2] (nm) Typ. 590 615 Viewing Angle 21/2 Degrees[3] Typ. 45 45 Luminous Efficacy v (lm/w) 480 263 Part Number HLMAKL00 KH00 Package Drawing C Notes: 1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 1-40 Electrical Characteristics at TA = 25C TS-AlInGaP T-13/4 Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 25 5 25 5 25 5 25 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 70 70 70 70 Speed of Response s (ns) Time Constant e-t/s Typ. 13 13 13 13 Part Number HLMTCL00 CH00 DL00 DH00 Thermal Resistance RJ-PIN (C/W) 210 210 260 260 AS-AlInGaP T-13/4 Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.9 2.4 1.9 2.4 1.9 2.4 1.9 2.4 1.9 2.4 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 25 5 25 5 25 5 25 5 25 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 40 40 40 40 40 Speed of Response s (ns) Time Constant e-t/s Typ. 13 13 13 13 13 Part Number HLMACL00 CH00 DL00 DH00 DG00 Thermal Resistance RJ-PIN (C/W) 210 210 260 260 260 AS-AlInGaP T-1 Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.9 2.4 1.9 2.4 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 25 5 25 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 40 40 Speed of Response s (ns) Time Constant e-t/s Typ. 13 13 Part Number HLMAKL00 KH00 Thermal Resistance RJ-PIN (C/W) 290 290 1-41 1.0 200 AMBER REDDISH-ORANGE IF - FORWARD CURRENT - mA 180 160 140 120 100 80 60 40 20 0 1.0 1.5 2.0 2.5 3.0 RELATIVE INTENSITY 0.5 0 550 594 600 621 630 650 700 WAVELENGTH VF - FORWARD VOLTAGE - V Figure 1. Relative Intensity vs. Wavelength. Figure 2a. Forward Current vs. Forward Voltage, AS-AlInGaP. 100 IF - FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.5 60 90 80 70 60 50 40 30 20 10 0 1.5 2.0 2.5 3.0 3.5 2.0 IF - FORWARD CURRENT - mA 50 40 R J-A = 585 C/W 30 RJ-A = 780 C/W 20 1.5 1.0 0.5 10 0.0 0 10 20 30 40 50 0 0 20 40 60 80 100 120 140 VF - FORWARD VOLTAGE - V IF - DC FORWARD CURRENT - mA TA - AMBIENT TEMPERATURE - C Figure 2b. Forward Current vs. Forward Voltage, TS-AlInGaP. Figure 3. Relative Luminous Intensity vs. Forward Current. Derating Based on TJMAX. Figure 4a. Maximum DC Current vs. Ambient Temperature for AS T-13/4 Lamps. Derating Based on TJMAX = 130C. 60 50 IAVG - AVERAGE CURRENT - mA f > 1 KHz 50 IF - FORWARD CURRENT - mA 50 IF - FORWARD CURRENT - mA 45 40 35 30 25 20 15 10 5 0 R J-A = 618 C/W 40 R J-A = 566 C/W 30 RJ-A = 600 C/W 20 40 f > 300 Hz f > 100 Hz 20 RJ-A = 412 C/W 30 10 10 0 0 20 40 60 80 100 120 140 0 0 10 20 30 40 50 60 70 80 90 100 TA - AMBIENT TEMPERATURE - C 50 100 150 200 TA - AMBIENT TEMPERATURE - C IPEAK - PEAK FORWARD CURRENT - mA Figure 4b. Maximum DC Current vs. Ambient Temperature for TS T-13/4 Lamps. Derating Based on TJMAX = 130C. Figure 4c. Maximum Forward Current vs. Ambient Temperature for T-1 Lamps. Derating Based on TJMax = 110 C. Figure 5. Maximum Average Current vs. Peak Forward Current. 1-42 1.0 0.9 NORMALIZED INTENSITY 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 20 18 16 14 12 10 8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 - ANGULAR DISPLACEMENT - DEGREES Figure 6. Normalized Luminous Intensity vs. Angular Displacement, HLMT-CH00/CL00. 100 90 NORMALIZED INTENSITY 80 70 60 50 40 30 20 10 0 20 18 16 14 12 10 8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 - ANGULAR DISPLACEMENT - DEGREES Figure 7. Normalized Luminous Intensity vs. Angular Displacement, HLMA-DG00/-DH00/-DL00. 1.0 0.9 NORMALIZED INTENSITY 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 - ANGULAR DISPLACEMENT - DEGREES Figure 8. Normalized Luminous Intensity vs. Angular Displacement, HLMA-KH00/-KL00. 1-43 |
Price & Availability of HLMA-CH00
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |